Messages and Signals
120
NO CONF. FUNCTION Confidential transmission was cancelled because
the receiving machine does not have a
confidential function, a confidential passcode is
not programmed in it, its memory is full, or it is not
a Sharp model.
NO PAPER This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper source is out of paper. If no paper source is
indicated, both paper sources are out of paper.
ONHOOK DIAL MODE The SPEAKER key has been pressed and the fax
machine is waiting for you to dial.
OUTPUT TRAY OFF The received document tray is not attached.
Attach it as explained in
Connections
in Chapter 1
(the tray must be attached for the fax machine to
operate properly.)
PAPER JAM The printing paper is jammed. See the following
section,
Clearing Paper Jams
.
RCVD CONF. FAX A confidential fax has been received in memory.
Print the fax as explained in
Confidential
Operations
in Chapter 5.
REMOVE ORIGINAL(S) The original document is jammed. See the
following section,
Clearing Paper Jams
.
SIZE ERROR This message will be followed by one of the paper
sources in parentheses, and informs you that the
paper loaded in that source is not all the same
size.
REPLACE TONER The toner cartridge must be replaced.
WAITING<MEMORY FULL> The memory has become full and scanning has
stopped during scanning of a multi-page
document. Scanning will automatically resume
when sufficient memory becomes free (for
example, after several pages are transmitted).