Filter
Top Products
Entering and Using Programs
85
5. Special
Functions
Entering and Using Programs
If you frequently perform the same operation involving the same party, you can
program all the steps of the operation into one Program Key. This allows you to
perform the operation by simply pressing that key.
♦ Any Rapid Key which is not already programmed as a Rapid Key or a
Group Key can be used as a Program Key.
♦ You can include a timer setting in the program to have the operation
performed automatically at a selected time.
♦ To clear a mistake in the procedures that follow, press .
Initial procedure
To program a Program Key, first perform the following procedure. After you
have completed this procedure, go to the procedure for the specific operation
you want to program (see the following pages).
STOP
1
Press , and .
2
Press to select SET.
3
Select a Program Key by pressing any
Rapid Key that has not yet been
programmed.
4
Enter a name for the program by pressing the letter entry keys (see Step
5 on page 24). (Maximum of 20 characters.)
If you don’t want to enter a name, go directly to Step 5.
5
Press .
MENU
5
1
1
START/
ENTER
Display:
1:PROGRAM ENTRY MODE
1=SET, 2=CLEAR
1:PROGRAM SET
PRESS PROGRAM KEY
Q / ! W / " E / # R / $ T / % Y / & U / ' I / ( O / ) P / =
SYMBOL
A /
|
S D F G / { H / } J / [ K / ] L / +
Caps Lock
Z / < X / > C V B N / * M / ? @ .au
SHIFT
/ ^ / / \ ; / :
Space
_
- . / , DEL
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39