Sharp MX-2600N All in One Printer User Manual


 
60
BASE SCREEN OF FAX MODE
Touch the [IMAGE SEND] key in the touch panel to open the base screen of fax mode. If the fax screen does not
appear, touch the [Fax] tab.
Select fax settings in the base screen.
(1) Send mode tabs
Use these tabs to change the mode of the image send
function. To switch to fax mode, touch the [Fax] tab.
(2) [Address Book] key
Touch this key to dial using a one-touch key or group
key. When the key is touched, the address book
screen appears.
(3) [Direct TX] key
Touch this key to send a fax by direct transmission.
When the [Direct TX] key is not highlighted, normal
transmission (memory TX mode) is selected.
(4) [Sub Address] key
Touch this key to enter a sub-address and passcode
for F-code transmission.
(5) Customized keys
The keys that appear here can be changed to show
settings or functions that you prefer.
(6) key
Touch this key to retrieve a destination using a search
number.*
* 3-digit number assigned to a destination when it is stored.
(7) [Speaker] key / [Pause] key / [Space] key
Touch this key to dial using the speaker.
When entering a fax number to be dialed, the key
changes to the [Pause] key. When entering a
sub-address, the key changes to the [Space] key.
(8) [Resend] key / [Next Address] key
The destinations of the most recent eight
transmissions by Scan to E-mail, fax and/or Internet
fax (including Direct SMTP addresses) are stored. To
select one of these destinations, touch the desired
destination. After a destination is selected, this key
changes to the [Next Address] key.
(9) Image settings
Image settings (original size, exposure, resolution)
can be selected.
(10) key
This key appears when a special mode or 2-sided
scanning is selected. Touch the key to display the
selected special modes.
(11) [Special Modes] key
Touch this key to use a special mode.
(12) key / key / key
When "Hold Setting for Received Data Print" or
"Received Data Image Check Setting" is enabled in
the system settings (administrator), this will appear
when a fax is received.
: Only "Hold Setting for Received Data Print" is
enabled
: Only "Received Data Image Check Setting" is
enabled
: Both settings are enabled
(13) This shows the currently selected fax reception
mode and the amount of free memory remaining.
Auto Auto
Auto
File
Quick File
Address Review
Direct TX
Sub Address
Address Book
USB Mem. ScanFaxInternet Fax PC Scan
Special Modes
Resolution
Exposure
Original
Scan:
Scan
Send:
Standard
Auto Reception
Fax Memory:100%
Speaker
Ready to send.
Resend
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(12)
(5)
(6)
(13)
(11)
(10)
04-1_Quick(Fax).fm 60 ページ 2008年5月14日 水曜日 午前8時33分