Sharp MX-M350U Fax Machine User Manual


 
8-2
KEY OPERATOR PROGRAMS
This chapter explains key operator programs that are related to the fax function. For key operator programs that are
related to general use of the machine, see the key operator programs manual.
KEY OPERATOR PROGRAM LIST
NOTE
You may not be able to use all of the programs in the key operator program list. Programs that you can use will
depend on what peripheral devices are installed on the machine.
Program name Page
OPERATION SETTINGS
Default display settings
8-4
The number of direct address/sender keys
displayed setting
8-4
Must input next address key at broadcast
setting
8-4
The number of file name/subject keys
displayed setting (when the network
scanner option is installed)
8-4
Initial resolution setting
8-4
Scan complete sound setting
8-5
Default exposure settings
8-5
FAX SETTINGS
Fax default settings
Fax own number and name set
8-5
Auto wake up print
8-5
Pause time setting
8-6
Speaker volume settings
8-6
Original print on transaction report
8-6
Remote reception number setting (only
when extension phone is connected)
8-6
Transaction report print select setting
8-6
Activity report print select setting
8-6
ECM (This setting is only effective if the other
machine is a G3 machine that supports ECM)
8-7
Distinctive ring detection
8-7
Disable of fax number direct entry
8-7
Fax send settings
Auto reduction sending setting
8-7
Rotation sending setting
8-7
Printing page number at receiver
8-7
Call timer at memory sending
8-8
Date/own number print position setting
8-8
Quick on line sending
8-8
Recall in case of line busy
8-8
Recall in case of communication error
8-8
Fax receive settings
Auto receive reduce setting
8-9
Number of calls in auto reception
8-9
Duplex reception setting (only when the
duplex module option is installed)
8-9
Print style setting
8-9
Set the telephone number for data
forwarding
8-9
Fax output tray setting
8-9
Anti junk fax setting
8-10
Fax polling security
Polling security setting
8-10
Passcode number setting
8-10