Sharp PN-E802 Computer Monitor User Manual


 
26
E
n
SCHEDULE
You can set the time to switch the monitor on and off.
Set this function with “SCHEDULE” in the OPTION menu. (See
page 22.)
-
:
– – – – – – – – – – – – – – – –
SCHEDULE
No.
POWERDAY OF THE WEEK
TIMEINPUT BRIGHT
– –
/
– –
/
– – – – – – –
– –
:
– –
:
– – – –
PC D-SUB
(1)
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
-
:
– – – – – – – – – – – – – – – –
(5)(2)(3) (4)(6)
OK···[MENU]
1920x1080
V: 60 Hz H: 67.5 kHz
1. Press or to select the SCHEDULE number, and
press
.
2. Set the SCHEDULE. (See the description below.)
Press
or to select items, and press or to
change the setting.
3. Press
MENU
.
SCHEDULE becomes effective.
(1)
●: SCHEDULE effective
-
: SCHEDULE not effective
(2) POWER
ON : Switches the monitor on at the specied time.
OFF : Switches the monitor off at the specied time and puts
the monitor in standby mode.
(3) DAY OF THE WEEK
Species the day of the week to execute the SCHEDULE.
0:ONLY ONCE
Executes the SCHEDULE once on the specied day.
Specify the day of the week to execute the SCHEDULE.
1:EVERY WEEK
Executes the SCHEDULE on the specied day of the week
every week. Specify the day of the week to execute the
SCHEDULE.
Periodic setting such as “Monday through Friday” is also
possible.
2:EVERY DAY
Executes the SCHEDULE every day regardless of the day
of the week.
(4) TIME
Species the time to execute the SCHEDULE.
Set the time on a 12-hour basis. (Factory default)
Can be entered as 24-hour time using the TIME setting in
DATE/TIME FORMAT.
(5) INPUT
Species the input mode at power-on. If you don’t specify
this the input active at the last power-off will appear. Input
modes displayed on DVI, HDMI, BNC and D-SUB will
depend upon the INPUT SELECT settings.
(6) BRIGHT
Sets the brightness when changing the screen brightness at
a specied time.
Caution
Do not switch off the main power after setting the
SCHEDULE.
Specify the correct date and time. (See page 22.)
SCHEDULE does not function unless the date and time are
specied.
Check regularly that the set date and time are correct.
When STANDBY MODE is LOW POWER, SCHEDULE
cannot be set.
When a temperature abnormality occurs and the backlight
brightness is reduced, the brightness is not changed even
if a schedule set to BRIGHT is executed.
TIPS
Up to 8 SCHEDULE items can be registered.
Setting the SCHEDULE ashes the power LED alternately
in red and orange in standby mode.
A SCHEDULE that has a large number has precedence
over that of a small number when schedules overlap.
If D-SUB of INPUT SELECT on the OPTION menu is set to
AV VIDEO, the input mode will switch to AV VIDEO (D-SUB)
regardless if set to D-SUB or VIDEO.
Menu Items