Sharp PN-455 Computer Monitor User Manual


 
12
E
Cautions regarding remote control unit
Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to
liquids, and do not place it in an area with high humidity.
The remote control unit may not work properly if the remote control sensor is under direct sunlight or
strong lighting. In such cases, change the angle of the lighting or the monitor, or operate the remote
control unit closer to the remote control sensor.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
Replace with new batteries at the earliest opportunity.
If you will not use the remote control for a long time, remove the batteries.
If the remote control does not work, even with new batteries, take the batteries out, check whether they
are facing the right way, then replace them.
Do not use rechargeable (Nickel-metal-hydride) batteries.
Remote control operation range
Operation range of the remote control unit is approx. 7 m (23 ft.) and an angle of approx. 10° from the
center to the top/bottom/right/left of the remote control sensor.
If the remote control unit does not work well:
Objects between the remote control unit and the remote control sensor may prevent proper operation.
Replace the batteries when they run low as this may shorten the remote control’s operation range.
If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.
Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.
Removing the battery cover
Gently hold down and press in
the arrow direction.
PO
W
ER
IN
P
U
T
M
EN
U
M
U
T
E
SIZ
E
R
E
M
O
T
E
C
O
N
T
R
O
L
B
R
IG
H
T
+
BR
IG
H
T
-
DISPLA
Y
MODE
V
O
L
+
V
O
L
-
10°
10°
13.1 feet (4 m)
13.1 feet
(4 m)
16.4 feet
(5 m)
Remote control sensor
Part Names - Remote Control Unit (Continued)