Sharp UX-470 Fax Machine User Manual


 
Chapter
8
Option
Settings
The option settings let you customise your fax to better suit your needs.
An initial setting has been made for each option at the factory. You can
change a setting by following the steps described for each option below.
FUNCTION
4
STOP
FUNCTION
4
2
1
STOP
FUNCTION
4
2
1
First press
FUNCTION and 4,
then press
# or to
scroll through the
options.
or
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not
made with the RESOLUTION key) for transmitting documents. Press 1
(YES) to set the default resolution to FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
Display
will show:
FINE PRIORITY
YES NO
or
GRAY SCALE LEVEL
Setting 2: GREY SCALE SETTING
This sets the grey scale used for the HALF TONE resolution setting. Press 1
for 16 levels (this gives lower quality and faster transmission) or 2 for 64
levels (this gives higher quality and slower transmission).
Initial setting: 2
Press
until
display
shows:
GRAY SCALE LEVEL
16 64
or
NUMBER OF RINGS
114