Filter
Top Products
Issuing tone signals
If you are on a pulse dial line, you can use the " " key to temporarily
issue tone signals when you press the numeric keys. This allows you
to use certain telephone services which require entering tone signals.
When you need to enter one or more tone signals, press the " " key
and then press the appropriate numeric keys.
To change back to pulse mode, simply hang up (the dialling mode
automatically changes back to the setting of Option Setting 9 when
you hang up).
PBX operations
If your fax is connected to a PBX, you can use it to perform the
following operations:
♦ Making enquiry calls: During a call, you can put the other party
on hold, make a further call to a third party, and then go back to
your original caller.
♦ Transferring calls: You can transfer a call to another number on
the same PBX without operator assistance.
Your fax is also fully compatible with British Telecom Network
Services and Telecom Eireann Phone Plus Services and can be used in
conjunction with any facility that requires a recall command.
Note: To perform PBX operations, Option Setting 11 must be set to the
appropriate recall mode for your PBX (see Chapter 8, Optional Settings).
Check your PBX manual or consult your supplier for the correct recall
mode. If you are using British Telecom Network Services or Telecomm
Eireann Phone Plus Services, Option Setting 11 must be set to time-break
recall. (This is the initial factory setting).
6. Making
Phone Calls
Making Telephone Calls
91