Sharp UX-B30 Fax Machine User Manual


 
Loading Printing Paper
14
Loading Printing Paper
You can load up to 100 sheets of A4-size paper (60 - 80 g/m
2
) in the paper
tray (at room temperature; maximum stack height should not be higher than
the line on the tray).
1
Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.
2
Insert the stack of paper into the tray,
PRINT SIDE UP
.
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
GENTLY LOAD PAPER INTO THE PAPER TRAY
.
DO NOT FORCE IT DOWN INTO THE FEED SLOT
.
Note: Do not use paper that has already been printed on, or paper that is curled.
The stack
should not
be higher
than this line
all.book Page 14 Tuesday, June 1, 2004 4:24 PM