Filter
Top Products
57
3. Receiving
Faxes
3. Receiving Faxes
Using TEL/FAX Mode
When the reception mode is set to TEL/FAX, your fax machine automatically
answers all calls on two rings (the number of rings can be changed as
explained on page 59). After answering, your fax monitors the line for about
five seconds to see if a fax tone is being sent.
♦ If your fax machine detects a fax tone (this means that the call is an
automatically dialled fax), it will automatically begin reception of the
incoming document.
♦ If your fax machine doesn't detect a fax tone (this means that the call is a
voice call or manually dialled fax), it will make a ringing sound (called
pseudo ringing) for 15 seconds to alert you to answer (the duration of
pseudo ringing can be changed as explained on the following page). If you
don't answer within this time, your fax will send a fax tone to the other
machine to allow the calling party to send a fax manually if they desire.
Note: Only the fax will alert you to voice calls or manually dialled faxes by
pseudo ringing. An extension phone connected to the same line will not ring
after the connection has been established.
AUFLÖS./
EMPFANG
FAX
TEL
AB
TEL/FAX
To select TEL/FAX mode,
press until the
arrow in the display
points to TEL/FAX.
AUFLÖS./
EMPFANG
all.book Page 57 Tuesday, June 1, 2004 4:24 PM