Filter
Top Products
Loading the Document
39
2. Sending
Faxes
2
Insert the document face down in the
document feeder. The top edge of the
document should enter the feeder first.
• READY TO SEND will appear in the
display.
3
Adjust the resolution and/or contrast settings as explained on page 40,
then dial the receiving machine as explained on page 43.
Removing a document from the feeder
If you need to remove a document from the feeder, open the operation panel.
Important!
Do not try to remove a document without opening the operation panel. This
may damage the feeder mechanism.
1
Open the operation panel.
2
Remove the document.
3
Close the operation panel, pressing
down firmly on both front corners to
make sure it clicks into place.
all.book Page 39 Tuesday, June 1, 2004 4:24 PM