Filter
Top Products
12
2
SelectinganOperatingMode
When you turn the register on and press the
m
key, the mode selection window will appear on the display,
listing available operating modes as shown below.
Modeselectionwindow
OperatingModes
You can select any mode other than REG from the list in the mode selection window. Your register supports
the following operating modes:
REG mode
This mode allows you to enter various sales information. The mode selection
window does not list this mode. To select this mode from the mode selection
window, press the
a
key.
OPXZ mode This mode allows clerks to take X or Z reports on their sales information.
OFF mode
This mode locks all operations of the register. When you select this mode, the
window will disappear. Pressing any key turns the register ON.
VOID mode This mode allows correction after nalizing a transaction.
X1/Z1 mode This mode is used to take various daily total reports (X1/Z1 reports).
X2/Z2 mode This mode is used to take various weekly or monthly reports (X2/Z2 reports).
PROGRAM mode This mode is used to program various items.
SD CARD mode
This mode allows you to save and load the data of your register to and from an SD
card.