Sharp XG-E3500U Projector User Manual


 
E-16
Connecting the Projector (RGB 1, 2: Computer)
Please carefully read the manual of the computer you will be connecting.
Before connecting, be sure to turn both the projector and the computer off. After making
all connections, turn the projector on first. The computer should always be turned on last.
You can connect your projector to a computer for easy projection of full color computer images and an external
monitor for simultaneous viewing. See pages 17 and 18 for details of the connections.
Refer to page 20 for a list of personal computers connectable to the projector. Use with computers other than
those listed may cause some of the functions not to work.
When the RS-232C terminal on this unit is connected to a personal computer via an RS-232C cable (cross type),
the personal computer can control the projector and the status of the projector can be checked. See pages 34 and
35 for details.
By connecting the projector mouse terminal to your personal computer’s mouse terminal, using the supplied
mouse control cables, you can use the remote control in place of the computer’s mouse. Refer to page 8 for
details.
Notes:
The wireless mouse or RS-232C function may not operate if your computer port is not correctly set-up. Please refer to your
computer owners manual for details on setting-up/installing the correct Mouse Driver.
Do not connect or remove the mouse control cable or RS-232C cable to/from your computer while it is on. This may damage
your computer.
Do not connect to the mouse input terminal for IBM/Mac and mouse input terminal for PC98 simultaneously.
“Plug And Play” Function
This projector is compatible with VESA DDC 1 and DDC 2B standards. This projector and a VESA DDC compatible
computer will communicate their setting requirements, allowing for quick and easy set-up.
Notes:
The “plug and play” function cannot be used with RGB 2 input.
The DDC, “plug and play” function of this projector is only functional when used in conjunction with a VESA DDC compatible
computer.
To display input terminal
To RS-232C terminal
6-pin DIN
Audio Cable for Personal Computer (Sold separately)
4-pin DIN
9-pin D-Sub
9-pin D-Sub
9-pin D-Sub
RGB Signal Cable (Supplied)
BNC 5 Cable (Sold separately)
Mouse Control Cable for IBM
PS/2 (Supplied)
Mouse Control Cable
for Macintosh Series
(Supplied)
15-pin
D-Sub
RGB
Switcher
(Sold
sepa-
rately)
Macintosh
Adaptor
(Supplied)
Mouse Control
Cable (Supplied)
15-pin
D-Sub