Filter
Top Products
E-30
On-Screen Display
Using the Blue Screen Function
■ This projector is equipped with a Blue Screen function
that will turn the screen blue when the video input
terminal is not connected to anything, or the video
component is turned off.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT / buttons to
select “IMAGE ADJ.” Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select “BLUE SCREEN,”
and press the ADJUSTMENT / buttons to select ON
or OFF. Press the MENU button to return to the normal
screen.
• When the Blue Screen function is on, the screen will
turn blue when no video signal is being input through
the video input terminal.
• When the Blue Screen function is on, and no video
signal is input via the input terminal for more than 15
minutes, the power is automatically turned off.
• The indicators appear as shown each minute before the
power is turned off, from five minutes before until one
minute before.
Notes:
• The Blue Screen Function does not operate in RGB mode.
• When the power is turned off, the POWER indicator will light red.
• To turn the power on again, press the POWER button to set it to OFF,
then press it again to set it to ON.
On-Screen Display
Using the Input Mode On-Screen
Display Override Function
The On-Screen Displays that appear during input select
(“RGB 1,024 @ 768, 75 Hz,” etc.) can be turned off.
Once INPUT DISPLAY is turned off, the On-Screen
Displays will not appear even if the INPUT CHECK button
on the remote control is pressed.
• Press the MENU button. While the MENU screen is
displayed, press the ADJUSTMENT / buttons to
select “IMAGE ADJ.” Then press the ENTER button to
display the IMAGE ADJ. screen as shown. Press the
ADJUSTMENT / buttons to select “INPUT DISPLAY,”
and press ADJUSTMENT / buttons to select ON or
OFF.
• When OFF is selected, the On-Screen Display (“RGB
1,024 @ 768, 75 Hz,” etc.) will not be displayed during
input select.
On-Screen Display
REMAIN 5M
REMAIN 4M
REMAIN 1M
BLUE SCREEN
BLK SCRN DISP
IMAGE ADJ.
REVERSE
INVERT
INPUT DISPLAY
[
OFF
]
[
OFF
]
[
OFF
]
SYSTEM
[
OFF
]
[
ON
]
:SEL.
:ADJ.
:END
MENU
BLK SCRN DISP
IMAGE ADJ.
REVERSE
INVERT
INPUT DISPLAY
:SEL.
:ADJ.
:END
MENU
[
OFF
]
[
OFF
]
[
OFF
]
[
OFF
]