Filter
Top Products
E-19
Connecting the Projector (RGB 2)
Connecting to the Computer RGB 2 Input Terminals
■ Prevents a deterioration of picture quality to enable 5 BNC computer input.
• Before connecting, be sure to turn both the projector and the equipment off.
• Connect the R, G/G-SYNC, B, H/C-SYNC and V-SYNC cables to the correct input terminals on the projector and
an RGB switcher (sold separately) connected to the computer, or connect a 5 BNC-VGA cable (sold separately)
directly from the input terminals on the projector to the computer.
Playback
To RGB Switcher
(Sold separately)
To R, G/G-SYNC, B,
H/C-SYNC and V-SYNC
output terminals
To audio output terminal
3.5 mm Stereo Minijack
to RCA L/R cable (Sold
separately)
• COMPUTER AUDIO
INPUT accepts
COMPUTER RGB 1
and 2 input.
• Use INPUT SELECT
to choose the
correct setting.
Side terminals
➞
RGB
Switcher
Note:
• When connecting a Macintosh Series computer that outputs C-SYNC, connect the cable to the COMPUTER RGB 2 INPUT
H-SYNC input terminal.