Sharp XG-PH50X Projector User Manual


 
-42
Geometric Adjustment
Upper Left Upper Right Lower Right
Lower Left
GEOMETRIC ADJUSTMENT
1 Press
on the projector or
on the remote control re-
peatedly until “GEOMETRIC
ADJUSTMENT” is displayed.
2 Press the buttons below to ad-
just the position, size or focus
of the projected image.
Match screen’s four sides to green
test pattern.
Pressing
''
''
',
""
""
",
\\
\\
\ or
||
||
| on the projector
or
on the remote control allows you
to shift the lens.
Pressing
on the projector or on
the remote control allows you to adjust
the projected image size.
Pressing on the projector or on the
remote control allows you to adjust the
focus.
3 Press on the projector or
on the remote control.
4 Press ', ", \ or | to move the
position for the upper left of the
image.
Move the upper left of the yellow frame
onto the upper left of the screen.
5
Press or to set the position.
6 Repeat the same procedure with
the positions for the upper right,
lower right and lower left of the
image.
At this time, pressing on the pro-
jector or
on the remote control
returns to the previous screen.
Before correcting the upper left of the
image, pressing
or
returns
to the reset confirmation screen.
When the position of the lower left is
set, the correction is made and the
display disappears.
Image Projection
On-screen Display