Sharp XG-PH50X Projector User Manual


 
-48
Resize Mode
Press on the remote control.
Pressing changes the display as shown.
To return to the standard image, press
while
RESIZE” is displayed on the screen.
This function can also be accessed from the OSD
menu (see page 74).
This function allows you to modify or customize the resize mode to enhance the input image. Depend-
ing on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY DOT”, “BORDER”, “STRETCH”
or “SMART STRETCH” image.
COMPUTER
RESIZE button
Mouse/adjustment button
('/"/\/|)
UNDO button
4:3 aspect ratio
Other aspect ratios
SVGA (800 × 600)
XGA (1024 × 768)
SXGA (1280 × 960)
UXGA (1600 × 1200)
SXGA (1280 × 1024)
NORMAL
1024 × 768
1024 × 768
1024 × 768
1024 × 768
960 × 768
FULL
1024 × 768
DOT BY DOT
800 × 600
1280 × 960
1600 × 1200
1280 × 1024
Resolution lower than
XGA
NORMAL FULL DOT BY DOT
4:3 aspect ratio
Output screen image
XGA
Resolution higher than
XGA
“NORMAL” is fixed when XGA (1024 × 768) signals are entered.
4:3 aspect ratio
4:3 aspect ratio
SXGA (1280
××
××
× 1024)
: Cutout area on which images cannot be projected.
: Area where the signals are off screen.
Input signal
Computer Image type
Image Projection