Filter
Top Products
-86
Helpful Functions Set during Installation (“Options (2)” menu)
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of RS-232C
Note
• Refer to the “SETUP GUIDE” contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
38400 bps
115200 bps
Bypassing Unused Input
Selections
This function allows you to skip the input mode
that you rarely use. You can skip the input modes
when pressing INPUT 1, 2, 3 button or INPUT 4, 5
button on the projector.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of Set Inputs
Selectable items Description
ON
Sets the INPUT 1—5 mode select-
able respectively.
OFF
Sets the INPUT 1—5 mode unavail-
able respectively.
INPUT 1—5