Filter
Top Products
User Manual
Page 39 of 92
LAN Group Configuration
LAN Group Configuration allows you to configure settings for each LAN group. Notice that you can also
view the status of advanced services that can be applied to a LAN group. Green indicates that the
service is enabled, while red indicates that the service is disabled.
LAN Group Configuration
Category Field Description
Unmanaged Unmanaged is a state when the LAN group is not configured and
no IP address has been assigned to the bridge.
Obtain an IP address
automatically
When this function is enabled, your router acts like a client and
requests an IP address from the DHCP server on the LAN side.
IP Address You can retrieve/renew an IP address from the DHCP server
using the Release and Renew buttons.
Netmask The subnet mask of your router.
PPP IP Address Enables/disables PPP unnumbered feature.
IP Address The IP address should be different but within the same subnet as
the WAN-side IP address.
Use the following Static IP
address
This field enables you to change the IP address of the router.
IP Address The default IP address of the router (as shown) is 192.168.1.1.
Netmask The default subnet mask of your router is 255.255.255.0. This