Filter
Top Products
User Manual
Page 53 of 92
Web Access Control
The Web Access Control page allows you to access the router via the web from a remote location like
your home or office.
Web Access Control
To configure Web Access:
1. From the Advanced Menu, select Application > Web Access Control.
2. Select Enable Web Access Control.
3. Select the Connection.
4. Configure the following fields:
Remote Host IP
Remote Netmask
Redirect Port
5. Click Submit to temporarily activate the settings on the page. The WAN address is now added
into the IP Access List. This allows you to access you router remotely.
6. To make changes permanent, click Save Settings.