Shiro ADSL 2/2+ Ethernet Modem Modem User Manual


 
User Manual
Page 86 of 92
4. Click Test.
The ping results are displayed in the page. If the ping test was successful, it means that the
TCP/IP protocol is up and running. If the Ping test failed, you should restart the router.
Full Modem Test
This test is used to check if your modem is properly connected to the network.
To perform a Full Modem test:
1. From the Advanced Menu, select Diagnostics. This opens the Diagnostics page.
2. Click Full Modem Test. This opens the Modem Test page.
3. Select your connection and then click Test.