Filter
Top Products
User Manual
Page 50 of 92
If a rule is not in the list, you can create your own rule in the User category. To create a new
rule, select User as the Category, and then click New. The Rule Management page opens.
Enter Rule Name, Protocol, Port Start, Port End, and Port Map, and then click Submit.
6. Click Submit to temporarily activate the settings.
7. To make changes permanent, click Save Settings.
DMZ Settings
Setting a host on your local network as demilitarized zone (DMZ) forwards any network traffic that is not
redirected to another host via the Port Forwarding feature to the IP address of the host. This opens the
access to the DMZ host from the Internet. This function is disabled by default. By enabling DMZ, you
add an extra layer of security protection for hosts behind the firewall.
DMZ Settings