Raven iDEN
100 20070914
• n=2:AssertDSRwhenthemodemhasnetworkcoverage.
Tip: S211 can also be used to request that DSR is always asserted. If
S211 is set to 3 and &S is changed to a non-zero value, S211 will be
changed to 1.
\APPP
SetmodemoperationtoPPPmode.Cannotbeconfiguredin
AceManager.\ASLIP
SetmodemoperationtoSLIPmode.DTRmustbeasserted
(&D0orS211=1).CannotbeconfiguredinAceManager.
\Qn
Setorquerytheserialportflowcontrolsetting.
• n=0:Noflowcontrolisbeingused.
• n=1:RTS/CTShardwareflowcontrolisbeingused.
• n=4:Transparentsoftwareflowcontrol.Usesescaped
XONandXOFFforflowcontrol.XONandXOFF
charactersindatastreamareescapedwiththe@character
(0x40).@indataissentas@@.
+FCLASS=n
ThiscommandsetstheRavenintoaparticularfax‐mode
operation,whichcausestheinternalhardwaretoprocessinfor
‐
mationpresentedintheDialcommandinamannersuitable
forthattypeofinformation.Cannotbeconfiguredin
AceManager.
• n=0:Fax/datacall.
• n=8:Normalinterconnect.
+WVCLASS?queriesthecurrentsetting.
+WVLASS=n
ThiscommandsetstheRavenintoaparticularvoice‐mode
operation,whichcausestheinternalhardwaretoprocessinfor
‐
mationpresentedintheDialcommandinamannersuitable
forthattypeofinformation.Cannotbeconfiguredin
AceManager.
• n=0:Normalinterconnect(usingline1).
• n=9:Fax/datacall.
*CTSE=n
ClearToSendEnable:ThisfeatureassertsCTSwhenthereisa
networkconnection.