Support User Manuals

Sierra Wireless 20070914 Modem User Manual

Open as PDF

of 159

Raven iDEN

112 20070914

\APASSTHRU

Note: This mode is not available

through the remote AT telnet

server. You will need to connect

to the Raven with it connected

directly to your computer.

Setsthemodemoperationtopassthroughmode.Thismode

willpassanycharactersreceivedontheportEthernetdirectly

totheinternalhardwaremoduleandoutputanycharacters

fromtheinternalhardwaremoduleouttheportEthernet.This

allowsdirectaccess/configurationofthehardwaremodule.

Oncethismodeisentered,

theunitmustbephysicallyresetto

returntonormaloperation.Thiscommandisnotavailablein

AceManager.

Note: It may take up to 30 seconds for the hardware module to

respond after CONNECT is output.

*CSX1=n

PassThruEcho:Echodatatothehost.

• n=0:Datawillbepassedtothehost.

• n=1:PASSTHRUmodewillechoallhostreceiveddata

andwillnotpassthedatatothemodemwhilethemodem

isnotassertingDCD.

Note: If the modem is asserting DCD, data will be passed from the

host to the modem as it normally is when *CSX1=0.

*PTINIT=string

AnyATCommandstringtobepassedtotheOEMmodule

beforeenteringPASSTHRUmode,e.g.AT&S1V1,etc.

• string=ATcommand(s)

*PTREFRESH=n

NumberofminutesofinactivityinPASSTHRUmodeto

resendthe*PTINITstringtothehardwaremodule.

• n=0:Disabled

• n=1‐255minutes

*RESETPERIOD=n

InPASSTHRUmode,modemwillberesetafterthisperiodif

nodatahasbeensentorreceived.Valueisinhours.

• n=0:Disabled

• n=1‐255hours

previous next