Configuration Commands
Rev 3.0B Feb.08 103
TCPT=n
IntervaltoterminateaTCPconnectionwhennoinor
outboundtraffic.
ThisvalueaffectsonlytheTCPconnectionin
TCPPADmode.
• n=interval
Caution: TCPT should never be 0 when using the TCP mode. A
broken TCP session can result in the modem being left with a TCP
half-open connection that can only be terminated with a reset.
*ENQ=n
OutputsanENQ[0x05]aftertheTCPCONNECTdelayedby
theDelayConnectResponsetime(S221).
• n=0:Disabled(Default).
• n=1:EnableENQonCONNECT.
UDP
ThisgroupincludescommandsspecifictoUDPserialcommu‐
nications.
Figure 1-6: AceManager : UDP
AIP=n
AllowIPaddress.
• n=0:AllowonlytheIPaddressspecifiedinS53toconnect
whenUDPautoanswerisenabled(S82=2).
• n=1:AllowanyincomingIPaddresstoconnectwhen
UDPautoanswerisenabled(S82=2).
Note: Always subject to any Friends filters that may be defined.