Raven iDEN
132 20070914
11. Configure the Raven for your
equipment.
a. Makeanyappropriatechangestotheserialport
parameterstomatchyourequipment.Thesechanges
aremadeunderthegroupSerial.
Caution: Do not under any circumstances change the
*MODEMHISPEED setting from the template configuration, the only
recommended setting to change is the S23 setting.
b. FollowthedirectionsabovetoWritethechangestothe
modem.
12. Reset the Raven.
a. ClicktheDisconnectbutton.
b. PressthemodemResetbuttononthefrontofthe
modem.
c. WaituntilthemodemREGindicatorislit.
d. DisconnecttheRavenfromyourcomputer.
13. Test the Raven Configuration.
Oncethemodemhasbeenactivatedandyou’vebuiltthe
commandstringitisrecommendedthattheRavenmodembe
testedprevioustofieldinstallation.
a. VerifythatthemodemChan,LinkandRegindicators
areblinkinginunisonconfirmingthatthemodemis
nowoperatingincircuitswitched(IS‐95)mode.
b. Usingaterminalemulationprogram(HyperTerminal)
setupfor9600bps,8databits,noparityand1stopbit,
verifythesettingsintheRaven.
1. Enterthecommand:AT.Ifyoudonotreceivea
replyof“OK”,enterATE1toenabletheecho
mode.
2. Enterthecommand:AT&V
3. Reviewthesettingsandconfirmthattheparam‐
etersarecorrect:+WS45=0, +WS46=23, and
+FCLASS=0
.Youmayneedtobackscrollthe
displaytoseetheparameters.