Filter
Top Products
1111
Dark lines pattern 2
Cause
Dierent order of ink colors due to bi-direction printing
Solution
Solution
Depending on the situation, perform a combination of the solutions below.
Print in the image improvement [MEDIUM] or [HIGH].
( P.3-34 IMAGE IMPROVEMENT)
Print in the print direction [UNIDIR].
( P.3-26 PRINT DIRECTION)
Set the print direction by the RIP software.
In the RIP software setting, choose the mode for unidirectional print ("Unidirectional",
"Outward", etc.) and then print.*
Print in the print mode [QUALITY].
( P.3-25 PRINT MODE)
Set the print mode by the RIP software.
In the RIP software setting, choose the mode to increase paths (“High Quality”, “PASS”, “Quality”,
etc.) and then print.*
*To change the settings, contact the RIP software sales agency.
–
Dark lines on the print..."
Dark lines
pattern 2"