Filter
Top Products
10
5. Select Silicon Image SiI... SATALink Controller,
then click Next.
6. Follow the on-screen instructions to complete the
installation.
For Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, click Locate
and install driver software (recommended).
3. Click Continue, insert the driver CD, click Next.
4. Click Close to complete the installation.
To Verify Windows Server 2008 Installation
1. Right click My Computer and click Manage.
2. Double click Diagnostics, select Device Manager.
3. Double click Storage Controllers, Silicon Image SiI
3114... Controller should be listed.
Windows 98SE
For New Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. Once Windows has been installed, right click My
Computer, click Properties, select Device Manager.
3. Double click PCI Mass Storage Controller listed
under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver CD and click Next.
6. Select Search for a better driver..., then click Next.
7. Check Specify a location, uncheck the other boxes,
type D:\9x-Me, then click Next. (Change D: to
match your CD-ROM drive letter)