Filter
Top Products
8
Windows Vista (64-bit)
For New Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do yo want to install Windows? screen,
click Load Drivers.
3. Insert the driver CD, click Browse.
4. Double click CD Drive... Drivers.
5. Double click 64bit:
For non-Itanium processors: select AMD64, then
click OK.
For Itanium processors: select IA64, then click OK.
6. Select Silicon Image SiI... SATALink Controller,
then click Next.
7. Follow the on-screen instructions to complete the
installation.
For Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, click Locate
and install driver software (recommended).
3. Click Continue, insert the driver CD, click Next.
4. Click Close to complete the installation.
To Verify Windows Vista Installation
1. Right click My Computer and click Manage.
2. Click Continue, select Device Manager.
3. Double click Storage Controllers, Silicon Image SiI
3114... Controller should be listed.