Filter
Top Products
9
Windows Server 2008 (32-bit)
For New Installation
1. Install the board and follow Microsoft procedures
to install Windows Vista accordingly.
2. At the Where do you want to install Windows?,
click Load Driver.
3. Insert the driver CD, then click Browse.
4. Double click CD Drive... Drivers.
5. Select 32bit, click OK.
6. Select Silicon Image SiI... SATALink Controller,
then click Next.
7. Follow the on-screen instructions to complete the
installation.
For Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, click Locate
and install driver software (recommended).
3. Click Continue, insert the driver CD, click Next.
4. Click Close to complete the installation.
Windows Server 2008 (64-bit)
For New Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At the Where do you want to install Windows?,
click Load Driver.
3. Insert the driver CD, click Browse.
4. Double click CD Drive... Drivers, double click 64bit:
For non-Itanium processors: select AMD64, then
click OK.
For Itanium processors: select IA64, then click OK.