Filter
Top Products
7
3. Insert the driver CD, select Install the software
automatically (Recommended), and click Next.
4. Click Finish and restart Windows to complete the
installation.
To Verify Windows 2000/XP/Server 2003 Installation
1. Right click My Computer and click Manage.
2. Select Device Manager.
3. Double click SCSI and RAID controllers, Silicon
Image SiI 3114... Controller should be listed.
Windows Vista™ (32-bit)
For New Installation
1. Install the board and follow Microsoft procedures
to install Windows Vista accordingly.
2. At the Where do you want to install Windows?,
click Load Driver.
3. Insert the driver CD, then click Browse.
4. Double click CD Drive... Drivers.
5. Select 32bit, click OK.
6. Select Silicon Image SiI... SATALink Controller,
then click Next.
7. Follow the on-screen instructions to complete the
Windows Vista installation.
For Existing Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard, click Locate
and install driver software (recommended).
3. Click Continue, insert the driver CD, click Next.
4. Click Close to complete the installation.