Filter
Top Products
6
5. Carefully align the card's bus connector
with the selected PCI Express slot on the
motherboard. Push the board down firmly,
but gently, until it is well seated.
6. Replace the slot bracket holding screw to
secure the card.
Device Connection
The DP SATA 6Gb/s 4-Port Hybrid PCIe supports
up to four Serial ATA hard disk drives. You will
need to purchase additional SATA data cable(s)
if a third or forth channel is going to be used.
1. Install your hard disk drive(s) in the chassis.
2. Connect the Serial ATA hard disk drive to
the system power supply.
Note: For hard drives with both SATA
power connector and legacy 4-pin
connector, use either the SATA power
connector or the legacy 4-pin power
connector. Using both power connectors
may damage the hard drive.