Filter
Top Products
Parameter Description Settings Default Setting
number (required for E-Cable UDP
mode only)
Ectmmsec Cable connection time resolution Enable, Disable Disable
Ecudp ECable UDP mode Enable, Disable Disable
Restoring Factory Default Settings
The factory default settings can be restored at any time To do this, hold down the Reset pushbutton for
more than five seconds.
Modifying TCP/IP Settings
You can modify the TCP/IP settings using the web browser interface or the Serial Device Server Serial
Device Server’s internal configuration console.
To modify TCP/IP settings:
1. You can configure the TCP/IP settings using the Web Page configuration. Simply log in using the
Serial Device Server IP address and select TCP/IP.
Figure 2 TCP/IP Window
Advanced Configuration Silex Page 27
Part Number 140-00188-210A