Filter
Top Products
Command Description
SET IP FTP Enables or disables FTP protocol
The default value is Enable.
Format:
SET IP FTP [ENable | DIsable]
SET IP HTTP Enables or disables HTTP protocol
The default value is Enable.
Format:
SET IP HTTP [ENable | DIsable]
SET IP KEepalive Sets interval in minutes for sending TCP keepalive packets on a connection
The default value is 5 minutes.
Format:
SET IP KEepalive n
SET IP LPD Enables or disables the LPD protocol
The default value is Enable.
Format:
SET IP LPD [ENable | DIsable]
SET IP MEthod Sets method of getting IP address
The default value is Auto.
Format:
SET IP MEthod [ AUTO | BOOTP | RARP | DHCP | STATIC ]
SET IP PIng Sends IP ping packets to test connection to remote host
Format:
SET IP PIng aa.bb.cc.dd
SET IP PRObe Enables or disables TCP connection probes
The default value is Disable.
Format:
SET IP PRObe [ENable | DIsable]
SET IP RARp Enables setting of default router and/or subnet mask based on RARP IP address set
The default value is 0.
Format:
SET IP RARp nn
nn: 0=both 1=no subnet, 2=no router, 3=neither
SET IP REtry Enables or disables LPD retry on incomplete job
The default value is Disable.
Format:
SET IP REtry [ENable | DIsable]
Console Commands Silex Page 54
Part Number 140-00188-210A