Filter
Top Products
38 Zeus
IOPS
3.5-Inch Fibre Channel Solid State Drive Product Manual Rev. 1.0
FCP-SCSI COMMANDS
SUPPORTED SCSI COMMANDS
Table 12 summarizes the SCSI commands supported by the Zeus
IOPS
SSD. Command queuing is
supported with all tag types (Head of Queue, Ordered Queue and Simple Queue). A maximum of 256
commands may be queued against each fibre channel port. This section only provides an overview
of the SCSI commands supported by the Zeus
IOPS
SSD. For more information, please consult the
SCSI specification, Fibre Channel Protocol - 3 (FCP-3), Project T10/1560D, ANSI INCITS 416-2006.
Table 12. Supported SCSI Commands
NOTE: Linked SCSI commands are not supported. NACA
does not apply to the Fibre Channel standard. As a result,
all the Control bytes of all the commands are ignored.
Command Code Command Name
A0h Report Luns
00h Test Unit Ready
08h Read (6)
0Ah Write (6)
12h Inquiry
Vital Product Data Page (00h)
Unit Serial Number Page (80h)
Device Identification Page (83h)
16h Reserve (6). Obsolete, but supported.
17h Release (6). Obsolete, but supported.
1Ah Mode Sense (6)
1Dh Send Diagnostics Page
4Dh Log Sense
25h Read Capacity
28h Read Extended (10)
2Ah Write Extended (10)
2Eh Write and Verify (10)
2Fh Verify (10)
3Bh Write Buffer
35h Synchronize Cache (10)
5Ah Mode Sense (10)