Filter
Top Products
A P P E N D I X C
Disablinguser USBaccess
98 smarttech.com/kb/170585
3. While holding the ECP to prevent it from falling, use a Phillips No. 2 screwdriver to remove the
twoscrews from the bottom of the ECP. Place the screws in a safe place.
4. Remove all cables connected to the ECP.
5. Locate the jumper cover between the “PC” and “SE240” labels on the side of the ECP that faces
the wall.
6. Using a pair of wire cutters, cut through the two tabs on the jumpercover and remove it from the
ECP. Keep the jumper cover in a safe place.