Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthroughan RS-232serialinterface
72 smarttech.com/kb/170585
Field Possible values Description
target usb1source l = VGA1
l = HDMI1
l = Disabled
Value to set the usb1 switch enabled source to.
Note that this should not be the same as the
usb2source. If it is, USB1 will be used and
USB2 is ignored.
current usb2source l VGA1
l HDMI1
l Disabled
Current value that the USB2 switch will be
enabled for.
target usb2source l = VGA1
l = HDMI1
l = Disabled
Value to set the usb2 switch enabled source to.
Note that this can not be the same as the
usb1source. If it is, USB1 will be used and
USB2 is ignored.
Example:
> set input=vga1
input = vga1
> set input=next
input = composite
> get videoinputs
videoinputs = vga1, composite, hdmi1
> get usb1source
usb1source = vga1
> get usb2source
usb2source = hdmi1
> set usb2source = hdmi1
usb2source = hdmi1
>