Filter
Top Products
I
NSTALLATION
2-4
The following figure shows the components of the Barricade:
SMC7004ABR
Figure 2-1. Front and Rear Panels
Item Description
Reset
Button
Use this button to reset the power and restore the default
factory settings.
LEDs Power, WAN and LAN port status indicators.
(See Verify Port Status on page 2-10.)
LAN
Ports
Fast Ethernet ports (RJ-45). Connect devices on your local
area network to these ports (such as a PC, hub or switch).
Printer
Port
Parallel port (25-pins, D-type, female). Connect the shared
printer to this port.
WAN
Port
WAN port (RJ-45). Connect your Cable modem, xDSL
modem, or an Ethernet router to this port.
COM
Port
Serial port (9-pins, D-type, male). Connect your ISDN TA or
56K analog modem to this port.
Power
Inlet
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may cause
damage.
SMC7004ABR
Reset
Power
WAN
10/100
Link/Act
1234
LAN
1234
12V 1A
WAN
COM
PRINTER