Filter
Top Products
C
ONFIGURING
THE
B
ARRICADE
4-13
Modem Initialization string
– Enter the initialization string
provided by your modem manufacturer. The following is a sample
initialization string: “ATQ1S0=1&D0&K0&W” as defined below:
Q1 : Inhibit result codes to DTE
S0=1 : Auto answer on first ring
D0 : Don’t care DTR
K0 : Disables DTE/DCE flow control
W : Write command to modem memory
Maximum Idle time
– Enter the maximum idle time for the
Barricade (in second).
Has your Internet Service Provider given you an IP address?
–
If you are assigned a dynamic IP address every time you dial up, mark
“No” for this item. However, if your ISP has assigned a fixed IP
address for you to use, mark “Yes” for this item and enter the IP
address and subnet mask.
Note: If your ISP has given you a secondary phone number, or if
you have a secondary Internet service account, then fill in
the relevant fields under “Secondary Dial-up.”
DNS Configuration
Domain Name Servers are used to map an IP address to the
equivalent domain name (e.g., www.smc.com). Your ISP should
provide the IP address for one or more domain name servers.
Enter those addresses on this screen.