Filter
Top Products
S
ETTING
TCP/IP
TO
W
ORK
WITH
THE
B
ARRICADE
5-10
1. Click "Start," then "Run..."
2. Type "WINIPCFG" and
click "OK." It may take a
minute or two for the "IP
Configuration" window to
appear.
3. From the drop-down menu,
select your network card.
Click "Release" and then
"Renew." Verify that your
IP address is now
192.168.2.xxx, your Subnet
Mask is 255.255.255.0 and
your Default Gateway is
192.168. 2.1. These values
confirm that your Barricade is functioning. Click "OK" to close
the "IP Configuration" window.