Filter
Top Products
I
NSTALLATION
2-4
System Requirements
You must have an ISP that meets the following minimum
requirements:
• Internet access from your Internet Service Provider (ISP) using an
xDSL modem, or cable modem.
• A PC using a fixed IP address or dynamic IP address assignment
via DHCP, as well as a gateway server address and DNS server
address from your service provider.
• For wired LAN connection, you need a computer equipped with
a 10 Mbps, 100 Mbps, or 10/100 Mbps Fast Ethernet card, or a
USB-to-Ethernet converter. For wireless LAN connections, each
computer must have an 11 Mbps wireless adapter.
Item Description
LEDs Power, WLAN, WAN and LAN port status indicators.
(See Verify Port Status on page 2-11.)
Wireless
Antennas
Dual antennas provide optimal reception by dynamically
choosing the best antenna for each client.
Reset
Button
Use this button to reset the power and restore the default
factory settings.
WAN
Port
WAN port (RJ-45). Connect your Cable modem, xDSL modem,
or an Ethernet router to this port.
LAN
Ports
Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (such as a PC, hub or switch).
Power
Inlet
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may
cause damage.