Filter
Top Products
N
AVIGATING
THE
W
EB
B
ROWSER
I
NTERFACE
4-8
While the Tools menu is used to backup the Wireless Barricade Plus,
restore the factory settings, update the firmware, or reset the Wireless
Barricade Plus. The Status menu is used to see the connection status for
the Wireless Barricade Plus’ WAN/LAN interfaces, firmware, and
hardware version numbers, any illegal attempts to access your network, as
well as information on all DHCP client PCs currently connected on your
network.
Main Menu
Using the Web management interface, you can define system parameters,
manage and control the Wireless Barricade Plus and its ports, or monitor
network conditions. The following table briefly describes the selections
available from this “Advanced Setup” screen.
Menu Description
System Menu Configures TCP/IP settings and client services.
Time Zone Sets the local time zone.
Password Settings Sets the password for administrator access.
Remote Management Sets the IP address for remote management
station.
WAN Menu • Specifies the Internet connection type: (1)
Dynamic IP host configuration and the
physical MAC address of each media
interface, (2) PPPoE configuration, or (3)
Static IP and gateway address.
• Specifies DNS servers to use for domain
name resolution.
LAN Menu Sets the TCP/IP configuration of the Wireless
Barricade Plus’ LAN interface and all DHCP
clients.
Wireless Configures the radio frequency, SSID, and
encryption for wireless communications.
NAT Menu Configures system IP settings, including:
• Address Mapping
•Virtual Server