SMC Networks SMC7004WFW Network Router User Manual


 
I
NSTALLATION
2-10
Attach the Wireless Barricade Plus to the Internet
If Internet services are provided through an xDSL or cable modem,
use unshielded or shielded twisted-pair Ethernet cable (Category 3 or
greater) with RJ-45 plugs to connect the broadband modem directly
to the WAN port on the Wireless Barricade Plus. Use either straight
through or crossover cabling depending on the port type provided by the
modem (see Appendix B).
Figure 2-5. Making WAN Connection
Note: When connecting to the WAN port, use 100-ohm Category 3,
4 or 5 shielded or unshielded twisted-pair cable with RJ-45
connectors at both ends for all connections.
Connecting the Power Adapter
Plug the power adapter into the power socket on the Wireless Barricade
Plus, and the other end into a power outlet. Check the indicator marked
Power on the front panel to be sure it is on. If the Power i
ndicator
does not light up, refer to Troubleshooting in Appendix A
.
RESET
9V
2AMAX
9 V
2AMAX
WAN
1
2 3
ISP
(Primary)
DSL/Cable
Modem