Filter
Top Products
S
ETTING
TCP/IP
TO
W
ORK
WITH
THE
W
IRELESS
B
ARRICADE
P
LUS
5-6
Windows 2000
1. Click the “Start” button and choose “Settings,” then click
“Control Panel.”
2. Double click the “Network and Dial-up Connections” icon, then
“Local Area Connection” icon, and press the “Properties” button
in the “General” tab.
3. Select the TCP/IP line that has been assigned to your network
card in the “Local Area Connection Properties” window.
4. Click the “Properties” button to set the TCP/IP protocol for the
Wireless Barricade Plus.
5. You can dynamically assign TCP/IP address settings to a client,
or you can manually configure a client with address settings to
meet your specific network requirements. (Note that the default
IP address of the Wireless Barricade Plus is 192.168.2.1.)