Filter
Top Products
SYMPTOM
: While scanning with the CHS, I turned off the
Pocket PC, or my Pocket PC entered suspend mode. Now my
Pocket PC won’t turn on again.
POSSIBLE REASONS SOLUTION
This is a known problem with
the Widcomm stack (built into
HP h221X iPAQ Pocket PCs with
ROM version 1.00).
Soft reset the Pocket PC by
pressing the reset button.
SYMPTOM: My Pocket PC shows an error message saying that
there are insufficient device resources.
POSSIBLE REASONS SOLUTION
Some HP iPAQ Pocket PCs are
not compatible with the
Cordless Hand Scanner.
The CHS will not work with your
Pocket PC at this time.
SYMPTOM
: Connect!Agent has found multiple CHS devices, and
I don’t know which one to choose.
POSSIBLE REASONS SOLUTION
This is your first time using
Connect!Agent to connect to a
CHS, and Connect!Agent has
found multiple CHS devices
using the default name.
Turn off the CHS device(s) you
do not want to connect to. Tap
Refresh. Connect!Agent will
connect to and save information
about your CHS to exclusively
connect to it in the future.
Same as above. If you have a Windows XP or
Windows Vista system, you can
install SocketScan and use the
Advanced Security Settings to
change the scanner’s Bluetooth
friendly name to something you
can easily recognize.
100