Filter
Top Products
If your CK30 suspends or the CHS moves out of range, the
connection will end. After the mobile device turns on again or
returns in range, SocketScan will try to re-connect for
approximately 3 minutes. If, after 3 minutes, they have not re-
connected, you will need to manually re-connect them.
DISCONNECTING
In the SocketScan menu, press 2 Disconnect Cordless Scanner.
Turning off the CHS
To turn off the CHS, press and hold the power button at least 3
seconds, until the blue LED turns off.
CHAPTER 4: SETUP FOR INTERMEC CK30 37