Filter
Top Products
Sonic OS 2.x Quick Start Guide
11.
gressive
13. Select the rest of the Phase 1 and
14. not use any of the
15. Click OK.
For the TZ170, we assume that it is also runnin
om the GUI, select the VPN
2. ct
3. te
4.
32.2.
d
5. ec Secondary
e X2
c
6. same value as the Pro 4060 Shared Secret.
mber of the TZ170.
Select the Proposal tab.
12. For Exchange, select Ag
Mode. Remember, the TZ170
receives a dynamic IP address
from the ISP.
2 proposal settings as required.
Ensure that they match up with
the settings you make on the
TZ170.
We will
Advanced Setting for this
example.
g the Enhanced software. Define the TZ170 SA as
follows:
1. Fr
option, and then click ADD.
For IPSec Keying Mode, sele
IKE using Preshared Secret.
For Name, enter an appropria
name for this VPN SA.
For the IPSec Primary
Gateway, enter 208.48.
This is the IP address assigne
to the X1 WAN interface of the
Pro4060.
For the IPS
Gateway, enter 0.0.0.0. Th
WAN interface of the Pro 4060
receives a dynamic IP via
PPPoE. If it was a static IP, you
could enter its IP as the IPSe
Secondary Gateway.
For Shared Secret, enter the
7. For the Local IKE ID, select Sonicwall Identifier and enter the serial nu
14