Sony KP-41T35 Projector User Manual


 
Getting Started
11
-EN
EN
LINE
IN OUT
MONITOR
OUT
VIDEO IN
VCR
AUDIO VIDEO
LINE
OUT
OUT
IN
AUDIO VIDEO
LINE
IN
OUT
IN
(
VAR/FIX
)
IN
VIDEO 1 VIDEO 2
S VIDEO
VIDEO
L
R
AUDIO
(
MONO
)
OUT
MONITOR
AUDIO
CONTROL S
OUT
AUX
TO
CONVERTER
VHF/UHF
Connecting two VCRs for tape editing using MONITOR OUT
You can record input images displayed on the screen.
This type of connection should be used only when you
connect from the line input of one VCR, and from the
line output of a second VCR.
Notes
Do not change the input signal while editing through
MONITOR OUT, or the output signal will also change.
You can use the S video jack to connect a VCR for playback
and the composite video connector to connect a VCR for
recording.
For models KP-41T35/46C36, you can connect the audio and
video outputs of the VCR to VIDEO 3 IN jacks instead of the
VIDEO 2 IN jacks.
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
(Rear of projection TV)
VCR (for playback)
VCR (for recording)
VMC-810S/820S
(not supplied)
VMC-810S/820S
(not supplied)
When connecting a single VCR to the projection TV, do not
connect the MONITOR OUT to the VCRs line input, while at
the same time connecting from the projection TVs VIDEO IN
connectors to the VCRs line output, as shown below.
(Rear of projection TV)
DO NOT CONNECT IN THIS WAY.
Video and audio
outputs
Video and audio
inputs