Sony MRW-EA7 Barcode Reader User Manual


 
G:\SONY PD\Data 2010\Sony PD_O1 model\MRW-EA7 mod-
el\JC092009_4262026211-MRW-EA7_GB(EU)\4262026211\01GB04C01-J.fm
masterpage:Left
MRW-EA7
3-218-810-23 (1)
8
Using the Reader/
Writer
Insert a memory card into the corresponding
slot on the reader/writer.
When inserting a card, push it in as far as it
can go.
Notes
Each card slot is designed so a card can only be
inserted in the correct direction.
Insert only one memory card into the
corresponding slot. Do not insert multiple cards
at the same time.
When inserting a mini SD Card, use an
appropriate adaptor (not supplied).
Do not insert a card upside down.
Forcibly inserting the card may damage the card
or the slot.
If a memory card is inserted incorrectly, you may
not be able to remove it. In the unlikely event
that a memory card becomes stuck in the reader/
writer, consult your local Sony dealer.
Inserting a Memory Card
Insert one of the following
cards in this slot:
• CompactFlash
• Microdrive
Insert one of the following
cards in this slot:
• “Memory Stick Micro”
(“M2”)
• “microSD Card and
microSDHC Card”
Insert one of the
following cards in
this slot:
• xD-Picture Card
Insert one of the
following cards in this
slot:
• “Memory Stick”
(without MagicGate)
• “MagicGate Memory Stick”
• “Memory Stick”
(with MagicGate)
• “Memory Stick Duo”
(without MagicGate)
• “MagicGate Memory Stick Duo”
• “Memory Stick Duo”
(without MagicGate)
• “Memory Stick PRO”
• “Memory Stick PRO Duo”
• “Memory Stick PRO-HG Duo”
Insert one of the following cards in
this slot:
• MultiMediaCard
• RS-MMC
• SD/SDHC Memory Card
• mini SD Card*
* Use an appropriate
adapter
(not supplied)
01GB01COV.book Page 8 Friday, July 23, 2010 5:21 PM