Filter
Top Products
39
Various ways of playback
Viewing various
information
You can check the track name, disc name,
etc. during playback.
1 Enter the menu and select “Display”.
2 Turn the jog dial to select the
information you want, and then press
the jog dial to enter the selection.
Each turn selects the display as
follows.
“Lap Time” t “1 Remain” t “Tr
Property”
When you press the jog dial, the
selected information appears at A,
B and C.
While the recorder is stopped
Depending on the group settings, the operating
conditions, and the disc settings, you may not
be able to select certain indications or the
indications may appear differently.
z
If you want to check the remaining time or the
recording position while recording or in stop
mode, see “Viewing various information”
(page 31).
Lap Time
A Track number
Group number
1)
B Elapsed time
C Track name
Artist name (Hi-MD)/
Group name (MD)
Album name (Hi-MD)/
Disc name (MD)
Jog dial
MENU
1 Remain
A Track number
Group number
1)
B Remaining time of the current track
C Track name
Artist name (Hi-MD)/
Group name (MD)
Album name (Hi-MD)/
Disc name (MD)
Tr Property
A Track number
Group number
1)
1)
Appears when the Main play mode is set to
“Group Play”.
B Elapsed time
C Track name
Group name
Codec information (Hi-MD)
2)
/
Track mode information (MD) and
time and date of recording
3)
2)
If the case of an MP3 track that supports VBR
(Variable Bit Rate), the bit rate that appears
here may not match the one displayed by the
SonicStage software.
3)
Appears for tracks that have time stamp
information.
Note